Welcome to the Maker Store Easter 2024 Bunny Tray Project repository! This collection of files is designed to complement the OutBack CNC Easter Bunny Tray Project, providing you with essential resources to bring your creation to life.

You can find the detailed guide for this project on our website https://www.makerstore.com.au/blog/2024-easter-holiday-outback-cnc-project/

-----------------------------------------------------------------------------------------------------------

Repository Contents:

	Generic CAD Model (Maker Store Easter 2024 Easter Bunny Tray.stp) - This file contains a 3D model of our project, facilitating precise visualization and planning.

   Within each of the software-specific files, you will find the following resources:

	Post Processors - These files are indispensable in the CAM software, enabling the generation of GCODE tailored specifically to your CNC controller.
	You can view a more in depth guide here: https://makerhardware.net/knowledge-base/how-to-guides/cnc-workflow-using-fusion-360-for-cnc/#articleTOC_8

	Maker Store End Mill Tool Library - This resource is a valuable asset, providing baseline tool setting and models to aid in the creation of accurate and efficient toolpaths within your selected CAM software.
	For installation instructions, please navigate to the following link: https://makerhardware.net/knowledge-base/how-to-guides/cnc-workflow-using-fusion-360-for-cnc/#articleTOC_5

  For Fusion360 users, you can find included an example .F3D file which has pre-loaded setup and toolpaths. These settings can also be used in Vectric or Carveco.

-----------------------------------------------------------------------------------------------------------

Critical Toolpath Setting Recommendations:
	Tool: #100 2 Flute Down Cut End Mill
	Spindle Speed: 16,500 RPM
	Cutting Feedrate: 1200mm/min (Note: This value is conservative; users with the OutBack CNC can push this to approximately 3000mm/min depending on your depth of cut).
	Roughing Step: 1mm (Note: This value is conservative; users with the OutBack CNC can utilize up to 6mm).
	Use Even Stepdown: TRUE
	Ramp Type: Helix
	Ramping Angle: 1deg

Please bear in mind that these settings are generalized to suit the C-Beam XL, WorkBee V3, and OutBack CNC Machines. Users with different machines may require alternative settings for optimal results.

-----------------------------------------------------------------------------------------------------------

If you have any questions or concerns, please do not hesitate to contact Maker Store. You can reach us via email at Sales@MakerStore.com.au. We're here to help you make the most of your CNC experience.